Plus 700 Molds Scientific Construction Angle Design Tungsten Carbide Saw Tips for Various Cutting Grooving Performance
Grade chart
| | Grade | ISO CODE | Grain Size | Binder | Density(g/Cm3) | Hardness(HRA) | T.R.S(N/mm2) |
| Industrial | SM02 | K01 | Ultra-micron | 2.8 | 15.0-15.2 | 94.5-94.8 | ≥2400 |
| SM03 | K01 | Sub-micron | 3 | 15.0-15.2 | 94.0-94.4 | ≥2600 |
| SM05 | K01 | Sub-micron | 3.5 | 15.0-15.2 | 93.8-94.0 | ≥3000 |
| SM07 | K05 | Sub-micron | 5 | 14.8-15.0 | 93.2-93.6 | ≥3000 |
| XP40 | M20 | Sub-micron | 10 | 13.0-13.2 | 91.2-91.8 | ≥2800 |
| XP30 | P30 | Sub-micron | 10 | 13.1-13.3 | 91.4-92.0 | ≥2700 |
| SM12 | M20 | Sub-micron | 10 | 14.2-14.4 | 91.8-92.3 | ≥3000 |
| Professional | XF6 | K10 | Fine | 6 | 14.7-14.9 | 92.0-92.8 | ≥2600 |
| XF8 | K20 | Fine | 8 | 14.5-14.7 | 91.0-92.0 | ≥2800 |
| XF10 | K30 | Fine | 10 | 14.3-14.5 | 90.5-91.5 | ≥3000 |
| Economical | XK10 | K10 | Medium | 6 | 14.8-15.0 | 90.5-91.0 | ≥2400 |
| XK20 | K20 | Medium | 8 | 14.6-14.8 | 89.5-90.5 | ≥2600 |
| YG8C | G20 | Coarse | 8 | 14.6-14.8 | 88.0-89.0 | ≥2700 |
| YG11C | G25 | Coarse | 11 | 14.3-14.5 | 87.0-88.0 | ≥2600 |
To achieve a ideal cutting performance , first, we produce tungsten carbide saw tips with good quality raw material from top suppliers, then, we have 8 series type of tungsten carbide, total over 3000 different dimensions with different angles, different design accroding to the final cutting requirement of customers, for wood, for metal, for non-ferrous metal, for steel for aluminum, different processing objet has their own nature, too hard, too soft, with nails, these are the one of factor which the engineer should consider when make the drawing of the mold, and also the accroding to the sawing way of machine, the engineer need to design different front angle, back angle, as we know for wood, we need big back angle, like our usual 60°back angle, make the sawblade cuts fast and sharp, on the contrary for hard metal, big back angle will make the sawtip cracked fastly, so our sawtips for metal cutting with 15-20°back angle.
Series-JX Stardard size are avaliable, no-side angle,easy to clamp by manual welding, enough margin for grinding working, used by hand-welding machine or automatic welding machine, for processing wood and non-ferrous metal
Series-JE Stardard size are avaliable, with 2 side angles 5°, reduce the grinding process and more pieces of sawtips per kilogram,used by automatic welding machine, for processing wood and non-ferrous metal
Serie-JP Stardard size are avaliable, used by hand-welding machine or automatic welding machine, for grooving metal
Serie JA & JC , Stardard size are avaliable, used by hand-welding machine or automatic welding machine, for cutting grass
